Search the Community

The fictional route Den Hampen - Kolfmeer - Vaalem exists of two electric railways who have a combined length of approximately 60 kilomters. This is an extension of on the original Den Hampen - Kolfmeer route. The route runs through typical Dutch landscapes and many interesting rail-ish places. The route is created by Jepparama. The route contains 15 new scenarios. Enjoy! Features: 60 kilometers long Manual in Dutch New download links in the "Requirements" tab Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

What is new / changed in 1.6 Update (24-6-2021) Due to the fact that link 2 of signal 180 (Ede Wageningen) was in the switch, here a new complete update of the route! And again with emphasis; remove the old version before installing the V1.6 Update 24-6-2021! What is new / changed in 1.6 Short but sweet ; here's an upgrade to 't Hart van Nederland V1.6 It was high time to put that online after many changes in the existing part, with the cant being the most feasible and under a curve radius from about 2000 because it is barely or not perceptible above that. Due to this change it is possible that scenarios can give an error of eg being next to the rails. Furthermore, the many objects from Frison, Coha and Chris who joined, a piece of VSM line up to the VAM, the industrial line to the Lage Weide, both of which are not yet completely finished and more.... Well, if you have to wait for that, we are a few years further. Make sure that the packages are up-to-date to avoid missing objects, although the last added item may not be in it (yet). For the manual etc. just keep the V1.5, don't know if anything new has been added and wouldn't be listed with this. I think that's enough for now, keep an eye on this post for changes. Latest bugfix included. (20-6-2021) And again with emphasis; remove the old version before installing the V1.6! =========== What is new / changed in 1.5 The reported errors etc. have been eliminated Furthermore, to my knowledge nothing has changed in terms of scenery, just make sure you have at least the Frison pack 3 and Christrains scenery pack up-to-date. For the Manual and Assets I advise you to keep 't HvN V1.4. It is possible that third party scenarios can give error like broken consist or AI error etc. And again with emphasis; remove the old version before installing the V1.5! ========= What is new / changed in 1.4 The Heart of the Netherlands is now available as version 1.4. New in this version is the use of Coha Tracks v2.1 and 4 WIP sections (Arnhem-Didam, Hilversum-Weesp, Utrecht-Woerden and Breukelen-Woerden). The reported errors etc. have been eliminated in the 2 beta tests and scenarios are checked. A NLweg2 lane from Tankje with moving traffic has been added where "Cars from Frison driving on roads of Christrains" are also needed! (see below) The required files are in the separate RWP assets file, including the Marklin folder that has remained unchanged compared to the previous one. Features: Breukelen - Utrecht - Arnhem - Nijmegen Utrecht CS - Amersfoort - Apeldoorn / Harderwijk Amersfoort - Ede-Wageningen 4 WIP Sections Arnhem-Didam Hilversum-Weesp Utrecht-Woerden Breukelen-Woerden Installation Extract the rar file that contains the route, the Assets (rwp) and this text file with the changed files compared to the earlier Assets file from v1.0 Before proceeding with installation and you want to keep v1.3 provisional, for example for scenarios, change the folder name of the route in Content -> Routes in your RailWorks folder from 47b6f7ad-85b8-667f-975a-5aeb7c18d28c to 47b6f7ad-85b8-667f- 975a-5aeb7c18d28c-v1.3 Don't you want to keep that? Then remove the named folder completely from Content -> Routes 47b6f7ad-85b8-667f-975a-5aeb7c18d28c For users of the first hour I refer you to st-ts-00138_HvN_Vol1_Assets.rar which is attached. Also take the manual with you for further requirements, etc. Finally, it cannot be said often enough, but again, all providers thank you for making it possible to build as realistic as possible. Have fun!

This package was originally intended as an exclusive set for Project Randstad, but due to increasing demand for this package, it was nevertheless decided to release it as a separate package for everyone. The set is meant to give routes an even more realistic picture, in my opinion overhead contact line is an important part of a route, because you constantly drive underneath it. A lot of time has been devoted to the development and testing of the set, but due to the complexity of the set, it is quite possible that something has been overlooked, errors can be reported in the topic at the train point. Note: Because this package relies on realism, it is an extensive and complicated package, placing realistic overhead wires takes a lot of time. Read this manual carefully! Features: Various types, including HSL SOUTH Manual in Dutch Installation: Install the included .rwp file with Utilities.exe "Steam\SteamApps\common\ RailWorks" start the game and "Clear Cache" Restart the game and have fun

[MT] SPR Baarn - Utrecht met Mat 64! You are in charge of nostalgic equipment! Due to defects with the sprinter trains, there is a shortage of trains, which is why the NS has decided to give a number of Plan V-trains a minor refurbishment, so that they can be used again and can serve in various sprinter series. Today Plan V runs on De Stichtse Lijn. The railway line between Baarn and Utrecht. Note: you can just tab bug signals.

Christrains free scenery items consists of a large pack with platform lofts, platform numbers, clocks, canopies, lamps, ticket machines, buffers, OV-Chipkaart poles, stationname signs and a lot more. Features: Easy to install Manual in Dutch Installation: Open the .exe file to install start the game en go to "settings\Tools\Clear Cache" Restart the game and have fun Manuals Here

This scenario is the continuation of '1985 - Full grain train 57552 to Aalten (Part 1)'. After the shunting work you are ready to return to Arnhem. The signal will turn green and you can leave. You will bring the cars to Arnhem Goederens, next you will take the locomotives to Arnhem Berg. The train service has been set up as closely as possible according to the original timetable. Freight trains are fictitiously added and the train compositions are also fictitiously constructed. Have fun with this scenario.

In this scenario, you’ll take ES 9112 from Rotterdam (its first stop in the Netherlands), to Amsterdam. After the passengers have disembarked, you will need to take the train to the yard to prepare it for its return journey to London. Traffic flow is high along the route, so it’s crucial to stick to the timetable to and avoid unnecessary stops and ensure a smooth ride. Equipment: E320 Estimated time to complete: 50-55 minutes Route: HSL Zuid AI: Over 40 trains, all sticking to their independent true to life schedule. BONUS: Scenario [SP] ICD 1023 Rotterdam to Amsterdam, for those who don't have the BR 407 add-on or would like to drive the IC Direct service in front of ES 9112. Stops: 11:32 / 11:34 Rotterdam CS 12:08 / 12:13 Amsterdam CS 12:20 Watergraafsmeer Yard F.A.Q. Some users reported an inbound train ended up on the same track as the user train. If this occurs, empty the CACHE and restarting resolves the issue. This is probably a bug in Train Simulator and/or a memory related issue, but I'll have a look if I can make some adjustments for the next release to prevent this from happening. ES 9112 Quickstart 1-1.pdf

The Schiphol–Antwerp high-speed railway is a high-speed rail line connecting Schiphol Airport railway station, to Antwerp, Belgium. This track is suitable for reaching of high speeds. This version runs from Watergraafsmeer/Amsterdam to Rotterdam. This High speed track was built between 2000 and 2006 and opened at 15 June 2009. At 15 September 2009 the first trains were able to run between Amsterdam and Rotterdam and as of December 2009 the full line was serviced except the branch to Breda which was opened at 3 April 2011. This track is being part of the international Paris – Amsterdam service and has an important function for domestic transport within the Netherlands. Trains are using regular track between Amsterdam and Hoofddorp. Thalys Paris – Amsterdam can reach a maximum speed of 300 km/u on the High speed railway. The HSL-South/HSL 4 track contains 25 KV AC voltage instead of the regular 1500 V DC voltage in the Netherlands and 3000 V in Belgium, just like the Betuweroute running in the Netherlands and Germany. Please read the readme carefully in order to make sure you have all required assets and rolling-stock. A couple of scenarios are included. Features: 62 kilometers long 8 Stations Manual in Dutch New download links in the "Requirements" tab Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

In this scenario we go back to the 80's. Back then there were still riding grain trains from Arnhem to Aalten. Today you are driving one of those grain trains with number 57552. Your shift starts at Arnhem Berg. From there you will drive to Arnhem Goederen to pick up the grain wagons. As soon as a time slot is available you will leave and take the train to Aalten. The cars will then be exchanged against the empty wagons. Please note that you are driving a freight train, which means other trains will often have a higher priority. The train service has been set up as closely as possible according to the original timetable. Freight trains are fictitiously added and the train compositions are also fictitiously constructed. Have fun with this scenario.

With this scenario we go back to the 80's. The time when TEE's, D-trains, IC's and 'buurland'-trains were still running on the Arnhem-Emmerich route, pulled by an 1100, 1200 or 1300. But there were also several freight trains, coal trains and ore trains. Today you take a coal train from Arnhem to Emmerich, where you disconnect the wagons and return to Arnhem as a separate decoy train. Due to a defective 1300, there are 4 locomotives of the series 2200 in front of this train today. The train service has been set up as closely as possible according to the original timetable. The freight trains are fictitiously inlaid. The train compositions are also partly fictitious. An attempt has been made to set up a realistic timetable with a wink to reality to bring a little more life in the scenario, but to bring back the feeling of the train service from that time. Have fun on this ride.

This Mod changes the entire sound within Train Simulator. Almsot everything has been redone and modified. In addition the driving physics have been overhauled including the removal of the camera shaking when braking or accelerating A preview video is here Sounds have been taken almost entirely from the YouTube Channel 4K Train Driver’s POV Dutch Railways. Additional sounds were recorded at Groningen railway station Installation 1. Install the ICMm DLC by ChrisTrains 2. Go to your Train Simualtor main folder (usually C:\Program Files (x86)\Steam\steamapps\ common\RailWorks). There is a executable program called Utilities.exe. Under the section Package Manager you can install the *.rwp file included in the download. If there is a problem with installing, you can try installing it manually: 1. Open the *.rwp with WinRAR or 7Zip. You’ll find a folder called ‘Assets’. 2. Copy this folder into you Train Simualtor main directory and overwrite everything when asked Cover photo: https://www.flickr.com/photos/robdammers/8763211599/ - CC BY SA 3.0

The Vechtdallijnen with the extension from Mariënberg to Almelo complete with scenery and all, along with this also the exit to Bedrijvenpark Twente this runs to the shunting tracks there, also from Hardenberg the extension to Emmen, with everything between Coevorden and Emmen to that extent it is clear that only the scenery has yet to be placed, between Hardenberg and Coevorden the scenery is about 80 percent off, so this will also be tackled in the next version, and I have also taken a path towards this industrial area of Coevorden, to the Coevorden Europapark this is also WIP, with the I here and there between Zwolle and Hardenberg added, replaced or what came out, the station on this piece (except for Zwolle) are all addressed to make it a bit more beautiful and realistic to make, At Zwolle the catenary wires from Tankje are only made up to track 16,15,14 as these are the most used for Arriva and it is without to put a lot of work into it and then remove it again, and to install a new catenary;) it must also be said that the other side of Zwolle station is still WIP, although I have made a turn towards Amersfoort as far as Wezep, and small piece of exit towards Lelystad, but, as I said, not initially important, I also made Zwolle RSG what runs alongside the route to the IJssel Bridge, this is actually also WIP there are sidings markers here, only no signals. With the route file there is a manual with the assets that you have to bring in so read it carefully before you switch to driving;), and in addition a Route and assets folder is added, should there be any problems with the route then hear I like them on the forum (s);) All I have to do is say thank you from all the assets marker and other content builders for using your beautiful objects, and also a thank you to Daniel for creating the scenarios (with broadcasting) Features: Manual in Dutch New download links in the "Requirements" tab Note: download is more than 450mb Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

Let op: Versie 2.2 op Dutchsims is gelijk aan deze 2.1 op Simtogether Een uitgebreid stappenplan over hoe deze route te installeren is vind je hier. Indien je er na het lezen van dit stappenplan nog steeds niet uit komt met de route zelf, assets en/of scenario's plaats dan je vraag op een van de volgende locaties: https://dutchsims.nl/viewtopic.php?t=94 OF https://simtogether.com/forums/forum/59-support/ Maak GÉÉN nieuw topic op het algemene forum hier of een ander forum buiten DutchSims of SimTogether, om de simpele rede dat ik daar je reactie niet of pas (veel) later kan lezen, op bovengenoemde locaties krijg ik namelijk notificaties zodra er een nieuw bericht is geplaatst . Daarnaast is het voor volgende gebruikers veel makkelijker als alle support gerateerde vragen mooi bij elkaar staan Lees de handleiding voor ALLE benodigde downloads Please consult the manual for ALL required downloads Bitte beachten Sie das handbuch für ALLE erforderlichen assets/downloads Deze versie van de route biedt ruim 100 kilometer rijplezier. Stap in de cabine en ervaar realistische, sterk op Nederland gebaseerde weilanden, veenlandschappen, bossen, steden en nog veel meer. Ben je iemand die graag met een sprinter op alle 18 stations stopt of houd je van Intercity’s die niet te vaak stoppen, geef je de voorkeur aan lekker rangeren op stamlijnen of raas je liever met 200km/h+ over een hogesnelheidslijn? Voor vrijwel iedereen is er wel wat te doen op de route. De route is weliswaar fictief maar met o.a. het landschap, sporenplan, seinen en bovenleiding heb ik geprobeerd de werkelijkheid zoveel mogelijk te benaderen. Kenmerken: 100 kilometer 18 stations Handleiding in Engels, Duits & Nederlands Installatie: Open het .exe-bestand om te installeren "Clear Cache" of gebruik "Train Simulator Blueprint removal tool" This release offers a total of 100 kilometres (~60 miles) of enjoyment. Enter the cab and experience realistic open fields, peat-soil, forests and cities based on the Netherlands. You could grab a sprinter service and call at all 18 stations or take the Intercity service which skips most of them. Do you prefer shunting at branch lines or doing over 200 km/h (~125 mph) on a dedicated high-speed line? This route offers opportunities for all different kinds of train services. Even though the route is fictional, the signals, tracks, overhead lines and landscape are all based on the real world situations and would – in theory – be possible to exist in real life. Features: 100 kilometers 18 stations Manual in English, German & Dutch Installation: Open the .exe file to install "Clear Cache" or use Train Simulator Blueprint removal tool" Diese Version der Route bietet mehr als 100 Kilometer Fahrspaß. Steig in die Kabine ein und du wird realistische, stark Niederländisch geprägte Weiden, Moorlandschaften, Wälder, Städte und vieles mehr erleben. Bist du jemand, der gerne an allen 18 Stationen mit einem Sprinter anhält oder magst du Intercity-Züge die nicht allzu oft anhalten? Bevorzugst du Rangieren auf Nebenstrecken oder fährst du lieber mit über 200 km/h über eine Hochgeschwindigkeitsstrecke? Für fast jeden ist auf der Strecke etwas zu tun. Obwohl die Route fiktiv ist, habe ich versucht, mich der Realität so weit wie möglich anzunähern, unter anderem mit Landschaft, Gleisplan, Signalen und Freileitungen. Eigenschaften: 100 kilometer 18 Haltestellen Handbuch in Englisch, Deutsch & Niederländisch Installation: Öffnen Sie die .exe Datei zu installieren "Clear Cache" oder verwenden Train Simulator Blueprint removal tool"

Northwest Netherlands v5.0 is now released! The route contains these railway lines: - Den Helder - Alkmaar - Amsterdam Central Station - Uitgeest - Haarlem - Amsterdam Central Station - Amsterdam Central Station - Schiphol Airport - Hoofddorp - [NEW] Enkhuizen - Zaandam - [NEW] Haarlem - Zandvoort Features: Manual in Dutch New download links in the "Requirements" tab Installation: Go to the folder "Railworks" Insert here the folder "Assets" Then start "Noordwest Nederland route_v5.exe" Make sure you have installed the latest packs such as SimTogether, ChrisTrains and Frison Scenery Packs. "Clear Cache" or use "Train Simulator Blueprint removal tool"

This scenario is the sequel to "1985 - Sneltrein 4322 van Arnhem naar Zwolle". Meanwhile the loco 1202 has been detoured and is standing in front of the train again. You just got a cup of coffee, train 4624 has just arrived and now you are waiting so you can leave at 10:22. The train service has been set up as closely as possible according to the original timetable. Freight trains are fictitiously added and the train compositions are also fictitiously constructed. Due to the lack of the DE-2, these have been replaced by the DM90. Have fun on the ride back to Arnhem. Note: Purely random IC529 to Groningen can get stuck at signal 148. The behavior of departing AI trains from Zwolle in the direction of Groningen/Leeuwarden is affected by this, but it does not affect the further course of the ride.

This is a repaint of the Class 374 / e320 Eurostar on the DTG DB BR407. Incl. a 16-part wagonset Preload. Features: Easy to install Manual in Dutch and English Installation: Go to the folder "railworks" Insert here the folder "assets" "Clear Cache" Required addons: Steam: DB BR 407 ‘New ICE 3’ EMU Add-On

In this scenario we go back to the time when the pulled Plan E tribes were still lord and master of the IJssellijn. In Arnhem you will take the 4322 from your colleague and bring the train to Zwolle. In Zwolle you will rearrange the locomotive to place it on the other side of the train, so that you can return to Arnhem as train 4639. The train service has been set up as closely as possible according to the original timetable. However, the train compositions are constructed fictitiously. Due to the lack of the DE-2, these have been replaced by DM90 sets. Remark: Due to the large number of AI trains, this is a fairly tough scenario.

Good morning! Today you will drive stopping server 7031 from Apeldoorn to Almelo. Nothing unusual is excepted as of now. You will depart in 4 minutes, prepare your train and let the passengers board. Good luck and have fun! Scenario created by Pjottr This scenario contains: Announcements Destionation displays on all trains Realistic timetable Attention to detail Feedback and tips are welcome! I always strive for a high quality standard in my scenarios.

Here are the repaints from the Dutch "Lekker lezen doe je in de trein" VIRM. In this version is are the repaints from the 9549/92, and new are the 9514 and 8707! If there are some problems you can contact me in Discord (@JacobTrainsNL#9782), but read the manual first for the installation. Enjoy! Features: Easy to install Manual in English & Dutch Installation: Go to the folder "railworks" Insert here the folder "assets" "Clear Cache" or use "Train Simulator Blueprint removal tool" Required addons: ChrisTrains: NS VIRM(m)

This is a composite package of objects made by Sjef! Features: Easy to install Manual in Dutch Installation: Open the .exe file to install start the game en go to "settings\Tools\Clear Cache" Restart the game and have fun

Today you are on your way to Zevenaar with train 55501. There you will pick up the loaded cars and leave the unloaded cars behind before returning to Arnhem as train 55500. You will have a hard job to handle the shunting work between the regular train traffic. Good luck with this tough scenario. The setup of the train service has been build according to the original timetable with some adjustments to get it working within TS. Have fun.

The Betuwe route between Emmerich (D) and Zevenaar (NL) !. In the first release of the approximately 200-kilometer-long route, it is currently starting in Millingen (b. Rees) (D) and ending in this release in Zevenaar. In a next release, the route from De Betuweroute to Valburg will be completed. Until where the route is completed in a subsequent beta is still unknown. The route between Millingen (b. Rees) (D) and Emmerich (D) is not yet provided with scenery, it is also still unknown in which beta this was completed. Features: 30 kilometers long 5 Stations Manual in Dutch New download links in the "Requirements" tab Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

Two NS serie 200-300 by Wilbur Graphics, in green. NS 259 equipped with classical lanterns NS 322 equipped with front and closing signals Features: 2 versions Manual in Dutch Installation: Install the included .rwp file with Utilities.exe "Steam\SteamApps\common\ RailWorks" start the game and "Clear Cache" Restart the game and have fun

A number of Leisure Engineering Updates for Electric Locomotives from The Netherlands for Microsoft Train Simulator and Open Rails. This package contains: update for the BST Benelux ICR bin update for the BST NS 1600 Bin : update for mstsbin with nightcab update for the BST NS ICRM Bin update for the CPPAT : the brakesysteem is changed in air single pipe, lights update, performance improved and Acela cab (km and kn) included update for the CT NS DD AR Bin : update for mstsbin update for the CT NS Koploper : better behaviour,.boundingbox, friction and brakes improved update for the CT NS Koploper (Bin) : better behaviour,.boundingbox, friction and brakes improved (binpatch required) update for the CT NS Mat54 (Bin) : update for mstsbin update for the CT NS Plant : better behaviour, boundingbox and brakes improved and better cvf file for rik’s cabview update for the CT NS Planv : better behaviour, boundingbox and brakes improved and better cvf file for Riks' cabview update for the CT NS Planv 419 : better behaviour,.boundingbox and brakes improved and better cvf file for riks cabview update for the CT NS 1200 (Bin) : update for mstsbin update for the CT NS 1800 (Bin) : update for mstsbin update for the DD-AR : brakes improved and boundingbox fix update for the DD-ARcab : cab with combined control update for the JT_NS Regiorunner (Bin) : the brakesystem is changed in air_single_pipe, Lights update, performance improved and Boundingbox fix day/night cabs (Bin patch required) update for the NS 1501 : brakes improved and better performance update for the Regpat : the brakesystem is changed in air_single_pipe, Lights update,. performance improved and Acela cab included update for the SGM(m) : better behaviour and sound for AI

A number of Leisure Engineering Updates for Diesel Locomotives of The Netherlands for Microsoft Train Simulator and Open Rails. This package contains: Patch for the acts 5811 : better performance Patch for the acts 67 : better performance Patch for the bst_ns6400bin : Better performance and cab for dynamic brakes (bin patch required) Patch for the christrains_syntus_lint41 : automatic coupler with rigid connection. Better behaviour in curves Patch fort he CT Buffel : better performance+sound+light update Patch for the CT NS Buffel (bin) : better performance+sound+light update+nightcab (bin patch required) Patch for the CT NS PlanU (Bin) : better performance. Light update (bin patch required) Patch for the CT Plan U : better performance. Light update Patch for the NS 2200 : better performance Patch for the NSDE1 41 : better performance, lights update and sound included Patch fort the wadloper : better performance, sound and light update