Help and Advice please

[Marky Mark 0]

Can somebody please  help me with this situation please? I have installed two routes now and neither have any track or overhead wires appearing and it is becoming very frustrating. I contacted SimTogether for help and they were no help whatsoever despite the route being downloaded from their webpage. I have downloaded Chris Trains Track Pack and that as you can see has not solved the problem. Any help would be appreciated. 

[Sjef61 2,219]

It would be helpful if you mentioned which routes are involved.

Looks like your missing also ground textures and overhead lines

This is a handy tool

 

[Marky Mark 0]

't Hart van Nederland and Noordoost Nederland

[Sjef61 2,219]

Did you follow the instructions mentioned in the manual?

Fore both NL routes you also need to buy payware routes.

 

All the NL routes uses MO Catenary as mentioned in the manual.

https://simtogether.com/files/file/101-nederlandse-bovenleiding-17/

 

so...

- check if you have all payware routes.
- follow the manual of each route and download everything and put it in a folder to install later.
- Use TS tools to check if you are missing anything.

 

 

If something cannot be found or the download  link no longer works, please report it here

[Marky Mark 0]

Yes I followed all the instructions in the manual and I purchased the payware routes for this route.

[Sjef61 2,219]

Check it again and cross off what you have downloaded and installed.

And what does TS tools indicate after this action what you are still missing.