Leaderboard

ChrisTrains heeft een zeer grote update uitgebracht voor de DD-AR, DDZ en ICNG. De DDAR en DDZ zijn nu veel fijner om te rijden met veel nieuwe en gewijzigde functies en natuurlijk nieuwe texturen en geometrie om ze er ook beter uit te laten zien. De ICNG heeft een nieuw cruise control-systeem gebaseerd op de nieuwste software die bij NS in gebruik is, evenals correcties en aanvullingen op de cabviews, enkele aangepaste tractie- en remfysica. En uiteraard wordt de ICNG-B in deze update opgenomen. Het downloadbestand dient volledig opnieuw te worden gedownload en geïnstalleerd. Dit bestand is beschikbaar in je account: https://simtogether.com/clients/purchases/ ChrisTrains has released a huge update for DDAR, DDZ and ICNG. The DDAR and DDZ are now much nicer to drive with a lot of new and changed functions and of course new textures and geometry to make them look better too. The ICNG has a new cruise control system based on the latest software in use at NS, as well as corrections and additions to the cabviews, some modified traction and braking physics. And of course the ICNG-B will be included in this update. To update your trains, a fresh installation is required. Please download the new file in your account: https://simtogether.com/clients/purchases/ --Release notes-- DDAR: *IMPORTANT* Because this is SUCH a large change, things that will not work: * rolling-start scenarios * old repaints / reskins - New: Fully re-written handbooks - New: Now compatible with master destination list and destination pre-setting - New: Changed quickdrive consists to allow them to appear on most Dutch routes - New: "E" now cancels throttle - New: Rebuilt wheels and bogies with better detail - New: Rebuilt pantographs with better detail - New: Rebuilt BSI couplers with better detail - New: Rebuilt front end under lights, around BSI coupler - New: Rebuilt cab control desk with better detail and new controls - New: Rebuilt exterior models with new texture mapping and full new textures - New: More details around coupler areas and between wagons (brake hoses etc) - New: Full re-write of throttle, brake and cruise control logic - New: Full re-write of headlight logic and in-cab headlight switches - New: Driver figure logic for AI and parked trains - New: Passenger figures and logic for AI and parked trains - New: Train lighting on/off now works with cab control - New: E-brake release functionality (in line with other new CT models) - New: throttle redesigned to make train 'feel' heavy - it doesn't take off like a rocket any more - New: Some new sounds for the passenger view - New: Updated bogies sounds - New: Cab rail, wind and high speed sounds - New: Cab control sounds - New: Horn sounds - New: Single white light front and rear when consist is parked or dead - New: Added a lot of missing decal labels in the cabview - New: Full manual control of pantographs via new cab switches - New: ABvk wagon to use in your own consists - New: Fully re-written cruise control, now more prototypical of the real train - New: ATB stop mode - New: ATB 40km/h reverse limit - New: ATB cab bell audio functions - New: ATB more rigorous overspeed checking - New: ATB can be turned on an off by trackside bakens scenery objects - New: ATB now uses ProRail stopping distances instead of the old "1km for everything" method when alerting drivers - New: ATB respects signal-enforced limits from CoHa signals - Fixed: Errors in the brake pressure blueprints - Fixed: Errors in the couplings that could 'torque' the train and cause derailment and other weird behaviour - Fixed: Code optimisation for items that did not need to run at full framerate (like clocks) - Fixed: Reverser now shows V/0/A in HUD instead of -100% to +100% - Fixed: Cab instrument lights now more soft yellow - Fixed: Cab gauges - removed green 'tint' - Fixed: Corrected analog gauges on the left of the console to now be battery voltage, line voltage and motor power - Fixed: Better cabview glass - less hazy - Fixed: Corrected position of cab lighting and meter lighting switches - Fixed: Cab and meter lights now visible from outside the cab - Fixed: Improved audio falloff for engine sounds so it's not so loud all the way into the distance - Fixed: Weirdness with random airbrake sound on the exterior - Fixed: Parked units now have both pantographs raised DDZ: *IMPORTANT* Because this is SUCH a large change, things that will not work: * rolling-start scenarios * old repaints / reskins - New: Fully re-written handbooks - New: Now compatible with master destination list and destination pre-setting - New: Changed quickdrive consists to allow them to appear on most Dutch routes - New: "E" now cancels throttle - New: Rebuilt wheels and bogies with better detail - New: Rebuilt pantographs with better detail - New: Rebuilt BSI couplers with better detail - New: Rebuilt front end under lights, around BSI coupler - New: Rebuilt cab control desk with better detail and new controls - New: Rebuilt exterior models with new texture mapping and full new textures - New: More details around coupler areas and between wagons (brake hoses etc) - New: Full re-write of throttle, brake and cruise control logic - New: Full re-write of headlight logic and in-cab headlight switches - New: Added interval wipers - New: Driver figure logic for AI and parked trains - New: Passenger figures and logic for AI and parked trains - New: Train lighting on/off now works with cab control - New: E-brake release functionality (in line with other new CT models) - New: throttle redesigned to make train 'feel' heavy - it doesn't take off like a rocket any more - New: Some new sounds for the passenger view - New: Updated bogies sounds - New: Cab rail, wind and high speed sounds - New: Cab control sounds - New: Horn sounds - New: Single white light front and rear when consist is parked or dead - New: Added a lot of missing decal labels in the cabview - New: Full manual control of pantographs via new cab switches - New: Fully re-written cruise control, now more prototypical of the real train - New: ATB stop mode - New: ATB 40km/h reverse limit - New: ATB cab bell audio functions - New: ATB more rigorous overspeed checking - New: ATB can be turned on an off by trackside bakens scenery objects - New: ATB now uses ProRail stopping distances instead of the old "1km for everything" method when alerting drivers - New: ATB respects signal-enforced limits from CoHa signals - Fixed: Errors in the brake pressure blueprints - Fixed: Errors in the couplings that could 'torque' the train and cause derailment and other weird behaviour - Fixed: Code optimisation for items that did not need to run at full framerate (like clocks) - Fixed: Reverser now shows V/0/A in HUD instead of -100% to +100% - Fixed: Cab instrument lights now more soft yellow - Fixed: Cab gauges - removed green 'tint' - Fixed: Corrected analog gauges on the left of the console to now be battery voltage, line voltage and motor power - Fixed: Better cabview glass - less hazy - Fixed: Corrected position of cab lighting and meter lighting switches - Fixed: Cab and meter lights now visible from outside the cab - Fixed: Improved audio falloff for engine sounds so it's not so loud all the way into the distance - Fixed: Weirdness with random airbrake sound on the exterior - Fixed: Parked units now have both pantographs raised ICNG: - Adding the new 3300 series ICNG-B in NS Flow colours for cross-border service to Belgium - New C1 wagon with extra toilet - New exterior textures for 'Flow' colour scheme - End wagons have the extra chopper on the roof - Two new master destinations ONLY available in the ICNG : Antwerpen-Centraal and Brussel-Zuid/Midi - Voltage options for Belgian 25kV and 3kV systems - Adjusted the 3100 and 3200 versions to have the new more yellow nose, to match the actual trains now in service - Added some power to traction as the original was a little slow compared to the real thing - In the cab: - Fixed the "always on" traction block indicator on the right MFD screen - Fixed the high voltage indicator on the right MFD screen - Fixed the 'door closed' light so it's mostly white - Removed the central door control button as it is now deleted from the real train - Fixed the wheel slip light (it was mistakenly associated with the holding brake) - New more prototypical cruise control function - behaves more as a speed limiter now - the throttle now determines the amount of power the cruise system can use - braking does not disengage the cruise limiter but DOES override the cruise calculated brakes - you MUST have throttle for the cruise system to be able to accelerate - New shortcuts for the MFD screen controls (CTRL-0 to CTRL-9) - C and Y shortcuts re-assigned to MFD buttons 8 and 7 - if the cruise system is turned off while the throttle is engaged, a throttle reset is required - Method (a) for setting cruise: open the cruise screen on the MFD, throttle to zero, pick a speed on the MFD (CTRL1-CTRL6), click the accept button on the MFD (CTRL-8 or C), throttle to power - Method (b) for setting cruise: open the cruise screen on the MFD, throttle to zero, click the cruise accept button on the MFD to lock in the current speed (CTRL-8 or C), throttle to power

CoHa Belgische Seinen pakket v2.0 / Pack de signaux belges v2.0 Het Belgische Seinen pakket v2.0 is uitgebracht. Nieuw in versie v2.0: - Portaalseinen - Seinportalen - Losse onderdelen voor seinportalen - Bijgewerkte handleiding met daarin ook een beschrijving van de werking van de TBL1+ en MEMOR bakens voor bouwers van treinen. Download is HIER te vinden Een speciaal woord van dank aan Sjef61 voor het maken en ter beschikking stellen van de kooiconstructies voor achter de portaalseinen, de seinportalen en bijhorende losse onderdelen. Sjef61 heeft zijn Belgische bovenleiding pakket geüpdatet (Versie 1) waarin zich onder andere enkele objecten bevinden welke te combineren zijn met de seinportalen. Laatst genoemde pakket is HIER te verkrijgen

We have two winners this month! @Chloe and @Mike te Boekhorsthave won the Screenshot of the Month April 22! Congratulations to your both! ? The awards have been added to the first and second places. New month, new chances! Join the screenshot of the month here. https://www.simtogether.com/competition Screenshot from @Chloe Screenshot from @Mike te Boekhorst

The winner of the Screenshot of the Month for March is @RedmarStam Congratulations Redmar! The awards have been added to the first, second and third places. New month, new chances! Join the screenshot of the month here. https://www.simtogether.com/competition

ChrisTrains heeft een kleine update uitgebracht voor de ChrisTrains Flirt 3 en Traxx 186. De update is gratis voor bestaande klanten en kan worden gedownload in je account. Als je dit product op het vorige TreinPunt.NL hebt gekocht, ga dan naar deze link. Meer informatie vind je hier. ChrisTrains has been released a minor update for the ChrisTrains Flirt 3 and Traxx 186. The update is free for existing customers and can be downloaded in your account. For customers who have previously purchased this add-on from TreinPunt.NL, please visit this link. More information can be found here. ChrisTrains Flirt 3: 4.2.0 Patch / Release notes. Support for the new Master Destination List. Fixed Kasteel Arcen -> Kasteeltuinen Arcen on the Arriva Flirt3 #459. ChrisTrains Traxx 186: 1.0.5 Patch / Release notes. Added a new Eurobalise type "CT Eurobalise TPS OFF" that turns off all train protection systems when crossed (puts the train into ISO mode) Made some changes to the ETCS logic to better deal with red lights behind lower speed limits (which sometimes were not 'seen') Made some changes to the ETCS logic to better deal with red lights behind yellow lights (which sometimes were not 'seen') Increased the brightness of the cab light in the external view - it was too dim for some players Added in-cab objects in the NMBS version to support the TBL1+ add-on from @Lander0606

SKTrains has released their second package of rolling stock, being the Belgian I10 carriages. For 8 euros you get 89 (!) different versions and liveries. More images, information and of course where to buy: https://sktrains.be/en/engine/24-HVI10.html

Het is weer tijd om de winnaar van de Screenshot van de Maand bekend te maken. Voor maart mogen we @Machininst Joshua feliciteren. Een prachtige screen en dikverdiende eerste plek. Ook felicitaties aan @NigelGiveYou, @Ein Mensch en @B.ts2021 voor een welverdiende tweede en gedeelde derde plek. Dank een iedereen voor het stemmen! Je kunt weer meedoen aan de volgende ronde, de maart ronde: https://www.simtogether.com/competition. The time is there to announce the winners of the Screenshot of the Month for March. We’re excited to announce that @Machininst Joshua has won the competition this time. An amazing screen and well deserved first place! Also congratulations to @NigelGiveYou, @Ein Mensch and @B.ts2021 for the respective second and shared third place. Well done! Thanks to everyone for voting! It’s now possible to join the next April round: https://www.simtogether.com/competition . First place / Eerste plek: @Machininst Joshua Second place / Tweede plek: @NigelGiveYou Third place / Derde plek (Shared/gedeeld): @Ein Mensch @B.ts2021

Er is een update voor SNCB HLD77/78. lange tijd werkte de nummering niet i.v.m. een update van de CT 6400 maar dat is nu dus verholpen. what's new: Version 2 includes Script fix New Model New Sounds New headlight modes Able to add lanternes with Keybind O, or when the train is a dead engine in editor Fix to numbering hier is de repaint te vinden: https://www.railsim-fr.com/forum/index.php?/files/file/2011-el-sncb-hld7778/

Het is tijd voor de grootste midlife-update ooit van ChrisTrains-producten. De Stadler Flirt 3, SLT, SNG, ICNG, VIRMm (en IRM) en ICMm (en ICM) vallen onder deze update. Daarnaast hebben de meeste goederenwagons ook een update ondergaan: de Hbbkkss, Sgns, Klmos, FCCPPS, Slmmnps, LAAERS, GTOW, Gbs, Z-wagons en Tads. En natuurlijk zijn deze updates gratis voor alle bestaande klanten. LEES na de installatie de release-opmerkingen van elke trein of wagon door, aangezien deze opmerkingen alles opsommen wat er in een model veranderd is. Voor elke trein bevinden de release-opmerkingen zich normaal gesproken in de map op het hoogste niveau, bijvoorbeeld: C:\Program Files (x86)\Steam\steamapps\common\RailWorks\Assets\ChrisTrains\NS SNG\RailVehicles. Als iets NIET wordt vermeld in de release-opmerkingen, is het NIET opgenomen in de update. Zo beschikt de ICNG nog NIET over de NS 'Flow'-versie aangezien dit niet zomaar een aanpassing van het kleurenschema is, maar een modelwijziging voor de grensoverschrijdende versie naar België (inclusief cabine aanpassingen en het toevoegen van een chopper op het dak). Deze update volgt later. Voor de reizigerstreinen is de grootste verandering in al deze updates de vernieuwde/verbeterde ATB-functionaliteit. Het heeft veel werk gekost en betekende in feite het herschrijven van 90% van de oude ATB-code. Het systeem komt nu echter veel dichter in de buurt van hoe het in de echte treinen functioneert. LEES ALSTUBLIEFT tenminste één van de handleidingen om vertrouwd te raken met hoe de ATB nu werkt in de treinen. De meest opvallende dingen die heel anders zijn, zijn : - De ATB reageert op de door COHA-seinen opgelegde snelheidslimieten. - De afstand tot aan een lagere snelheidslimiet waarop de ATB reageert, is nu gebaseerd op de officiële door ProRail gepubliceerde afstanden (de oude ATB was hard gecodeerd op 1 km voor elke snelheidslimiet). Dit betekent dat sommige routes u kunnen 'overvallen' met lagere snelheidslimieten indien de snelheidsverlagingsborden op de verkeerde plaats staan. - Er is een "analoge" vertraging van ongeveer 3 seconden vanaf het moment dat de trein een wijziging in de snelheidslimiet registreert (hoger of lager) en de verandering van de snelheidsindicatie in de cabine. Dit is natuurgetrouw aan het echte ATB-systeem. - De ATB verandert naar een hogere snelheidslimiet zodra de kop van de trein de nieuwe snelheidslimiet passeert, en dus niet meer zoals vroeger na passage van de achterzijde van de trein. Voor de goederenwagons zijn de veranderingen voornamelijk cosmetisch, samen met enkele geluidsupdates, en de mogelijkheid om nu ofwel een knipperend rood licht (knipperbol) of een geverfde eindplaat (sluitplaat) op de laatste wagon van de treinsamenstelling te plaatsen. Deze instelling moet in de scenario editor worden gedaan door een 'k', 'n' of 's' toe te voegen aan het einde van het wagonnummer. LEES ALSTUBLIEFT de release-opmerkingen van elke wagon voor informatie over deze instelling. Twee zeer belangrijke zaken: (1) Ik heb mijn uiterste best gedaan om deze updates zo veel mogelijk neerwaarts compatibel te maken. Er zijn echter zeker bepaalde dingen die gewoon niet meer zullen werken, zoals scenario's waarin de speler twee verschillende treinen met elkaar moet koppelen als onderdeel van het scenario (dit zal niet werken omdat in veel gevallen de interne wagennummers zijn veranderd om vooraf ingestelde bestemmingen mogelijk te maken) en scenario's die beginnen waarbij de spelerstrein al rijdt. (2) Er is een extreem grote kans dat oudere repaint-pakketten niet meer werken na deze update. Dit komt door het enorme aantal wijzigingen aan de bedieningselementen in de cabines die de oudere repaint-bestanden niet hebben. Ik raad aan om na deze update NIET te proberen oudere repaint-pakketten opnieuw te installeren totdat de auteurs van die pakketten de kans hebben gehad om hun repaints compatibel te maken. Alle nieuwe bestanden zijn beschikbaar op SimTogether in je account. De rechtstreekse link: https://simtogether.com/clients/purchases/ Omdat dit als een grote update wordt beschouwd, worden alle activeringssleutels op nul gezet (10 activeringen resterend). The time has come for the biggest mid-life update ChrisTrains products have ever seen. Included in this update are the Stadler Flirt 3, SLT, SNG, ICNG, VIRMm (and IRM) and ICMm (and ICM). In addition, most of the freight wagons have also seen an update - Hbbkkss, Sgns, Klmos, FCCPPS, Slmmnps, LAAERS, GTOW, Gbs, Z-wagons and Tads. And of course these updates are free for all existing customers. PLEASE read the release notes for each train or wagon after installation, as these notes list everything that has changed in each model. The release notes are normally found in the top-level folder for each train, for example: F:\Program Files (x86)\Steam\steamapps\common\RailWorks\Assets\ChrisTrains\NS SNG\RailVehicles. If something is NOT mentioned in the release notes, it is NOT in the update. For example the ICNG does NOT have the NS 'Flow' version yet as this is not just a paint change, but a model change for the across-border version for Belgium (including cab changes and adding a chopper to the roof). This will come later. For the passenger trains, the single biggest change in all of these updates is the updated/enhanced ATB functionality. It has taken a lot of work and basically meant re-writing 90% of the old ATB code. However, the system is now much closer to what you would find in the real trains. PLEASE read at least one of the handbooks to familiarise yourself with how ATB now works in these trains. The major things you'll notice that are quite different: - ATB responds to COHA signal-enforced limits - The distance from a lower limit where ATB will respond is now now based on the official ProRail published distances (my old ATB was hard-coded to 1km for every limit). This means that some routes might 'ambush' you with lower limits if their lower limit speed limit warning signs are in the wrong place. - There is an "analog" delay of about 3 seconds from the train registering a change in speed limit (higher or lower), to the cab indicators changing. This is true-to-life to the real ATB system. - ATB will change to higher limits as the nose of the train passes the limit, not the tail (like it used to) For the freight wagons, the changes are mostly cosmetic, along with some sound updates, and the ability now to have either a flashing red light (knipperbol) or painted end-of-train plate (sluitplaat) on the last wagon in a consist. This choice is performed by adding a 'k', 'n' or 's' to the end of the wagon number in the consist editor. PLEASE read the release notes for each wagon as this information is contained in the notes. Two very important issues: (1) I have tried hard to make these updates as backward-compatible as possible. However, there are bound to be certain things that simply won't work any more, including any scenario where the player has to couple two different consists together as part of the scenario (this won't work because in many cases the internal wagon numbers have changed to accomodate pre-set destinations), and scenarios that start with the train already in motion. (2) There is an extremely high chance that older repaint packs will not work after this update. This is because of the sheer number of changes to controls in the cabs that the older repaint files will not contain. I would recommend NOT trying to re-install older repaint packs after this update until the authors of those packs have had chance to bring their repaints into compatibility. The updates are now available on SimTogether. The updates can be downloaded here: https://simtogether.com/clients/purchases/ Because this considered to be a major update, all activation keys will be reset to zero (10 activations remaining)

A lot of votes have been submitted for the Screenshot of the Month. The winner of the Screenshot of the Month is @Blije Computer. Congratulations, Blije Computer!! The awards have been added to the first and second places. New month, new chances! Join the screenshot of the month here: https://www.simtogether.com/competition First place: @Blije Computer Second place: @etienne123@rcdevisser@NigelGiveYou First place @Blije Computer Second place: @etienne123 @NigelGiveYou @rcdevisser

ChrisTrains heeft een grote update uitgebracht voor de ChrisTrains ICM. De update is gratis voor bestaande klanten en kan worden gedownload in je account. Download het volledige installatiebestand opnieuw en installeer de ICM. Het ICM paintpakket is niet langer te koop en is nu onderdeel van deze nieuwe versie. ChrisTrains has been released a big update for the ChrisTrains ICM. The update is free for existing customers and can be downloaded in your account. Re-download the full installation file and install the ICM. This update now includes the old retro paint pack. The old retro paint pack has been removed from the store for that reason. Release notes: Due to changes in consist and wagon numbers and internal names, old scenarios might show a "consist changed" error. If this happens, click "edit", then just save the scenario and start playing. Nothing else is required. - Fully upgraded model - New: geometry and textures for all the exterior models and the cab. OLDER REPAINTS WILL NOT WORK WITH v4.0 - New: much more detail than older versions - rebuilt underside details - rebuilt wheels - rebuilt bogies - rebuilt coupler - rebuilt pantograph - corrected interior floor height and rebuilt steps and areas around doors and balconies - New: new cab model - rebuilt to now have back of cab - 360 camera option - retextured with higher detail - rebuilt switches and controls - corrected some old texture errors in warning lamps - added missing decals on the driver console - new GSM-R - new tablet holder - New: new simulation and wagon scripts. Much more memory efficient, much quicker to execute - New: higher detail textures for exterior window frames - New: passenger and driver models - New: horn sounds now loop - New: all-new engine sounds, running sounds and cab sounds. Thanks to LinusF for some of the engine sounds. - New: cab control sounds (thanks to my beta team for recording some of these) - New: wagon interior lighting now controllable from the cab - New: 'dead' and parked engines have interior lighting off, no passengers, no drivers - New: now uses master destination list with ability to pre-set destinations - New: headlight controls for shunting and danger modes - New: headlight dimming control - New: "E" to zero-out throttle - New: HUD controls have correct notch names (instead of 0%-100%) - Fixed: performance / framerate problem when too many ICM's were visible in the same scene - Fixed: Power / brakes / weights - much more prototypical - Fixed: added UIC codes to exterior of ICMm - Fixed: brake gauges now work when multiple consists are joined together - Fixed: excessive camera shake in the cab - Fixed: brake handle now has notches / detents - Fixed: a lot of errors in the 10-year old ATB code - Fixed: max ATB speed now corrected to 140 instead of 160 - Fixed: ATB lamp above '160' blanked off - Fixed: modern headlight logic - Fixed: wiper controls now work correctly in-cab and in the HUD

A lot of votes have been submitted for the Screenshot of the Month. The winner of the Screenshot of the Month is @tychoopcfan Congratulation, Tychoopcfan! The awards have been added to the first, second and third places. New month, new chances! Join the screenshot of the month here: https://www.simtogether.com/competition

A lot of votes have been submitted for the Screenshot of the Month. The winner of the Screenshot of the Month is @MannkKraft Congratulation, MannkKraft! The awards have been added to the first, second and third places. New month, new chances! Join the screenshot of the month here. https://www.simtogether.com/competition

Coha heeft een nieuwe versie uitgebracht van het Nederlandse seinenpakket. Versie 4.0 is nu te downloaden op de versie van Coha. Maar is er meer: Coha heeft namelijk ook een nieuw pakket uitgebracht: Stopborden pakket v1.0. Twee mooie nieuwe updates, waar ongetwijfeld veel tijd en energie is gaan zitten! Coha has been released a new version of the Dutch signal package. Version 4.0 can now be downloaded. But there also is a new package available for download. This package includes several stop signs. Two remarkable new updates which the creation of it doubtlessly took a lot of time! Signal package: https://coha.nl/viewtopic.php?t=463 Stop sign package: https://coha.nl/viewtopic.php?t=545

Bijna is het zover. Dan releasen @HSL en @Michael1234de nieuwe versie van de HSL route. In deze nieuwe versie is het traject Rotterdam - Antwerpen toegevoegd. Het stuk tussen Breda en Rotterdam is volledig voorzien van scenery. Als trouwe SimTogether gebruiker, ontvang je morgen gloednieuwe scenario's voor deze nieuwe versie van de HSL-route. Een dankjewel voor je aankoop op SimTogether en om ervoor te zorgen dat je de nieuwe route direct kunt spelen. Je vindt de nieuwe scenario's vanaf morgen in je account onder downloadbestanden bij de aankoop van de ICNG.

The winner of the Screenshot of the Month for February is @tychoopcfan! Congratulations Tychoopcfan! The awards have been added to the first, second and third places. New month, new chances! Join the screenshot of the month here. https://www.simtogether.com/competition

Yesterday RSSLO released their new Passau - Regensburg route. With the route comes the following locomotives and rolling stock: DB BR147 DB BR182 (only as AI) DB DABpzb DB Bpmz 295 Snps The route can be bought for 34,99€ on the site of RSSLO.

Afgelopen zondag 17 Oktober is versie 3,6 uigekomen van het NL overwegen pakket, zie hieronder de veranderingen. Nieuw toegevoegd aan het Nederlandse overwegen pakket zijn: versie 3.6: - Extra Overweg beveiligingscamera's - Nieuwe AhobC (nr 017) - Nieuwe, verbeterde uitlijntool voor de overwegen en aanvullende objecten (lees info in de handleiding par 4.1 + 4.2) versie 3.5: - Verbeterde WIDO : schijnt nu iets minder fel naar de grond toe - Hekwerken Arfman (groen) - Twee hekwerken met enkele plaat (4 resp 5 vakken) - Betonblok met rood-witte platen aan één zijde - Overweg beveiligingscamera's versie 3.4: - Speciaal op maat gemaakte overweg voor de Zuiden van Nederland route versie 3.3: - Losse overwegplaten - Speciaal op maat gemaakte overwegen voor de Achterhoek- en Twentelijnen route versie 3.2: - Gecorrigeerde schrikhekken plus enkele nieuwe uitvoeringen - Speciale AKI Zevenbergschenhoek - Extra ontruimingslichten - Nieuwe HAKI overweg - Voorijlers onbewaakte overweg welke aan het spoor gelinkt kunnen worden. - Andreaskruisen op ijzeren (niet-geschilderde) palen - Toestemmingsseinen - Hekwerken - Speciale op maat gemaakte overwegen voor de Noord-Oost Nederland route en 't Hart van Nederland route en nog diverse extra objecten Download: https://coha.nl/viewtopic.php?f=21&p=3729#p3729

Koen heeft een update uitgebracht van de Vechtdallijen en wel versie 3,5 Er is weer een hoop veranderd na de vorige versie 3.0 Beta Zo is de scenery: tussen Hardenberg - Emmen helemaal klaar scenery tussen Hardenber en Almelo/Ommen verbeterd, is Station Zwolle Compleet gemoderniseerd (op het rangeerterrein na) en is de lijn van Almelo naar Marienberg gemoderniseerd met nieuwe rails en een hogere snelheid (120 ipv 80) En ook is er nog weinig over van station Geerdijk. English: Here is the release of the Vechtdallijnen Beta 3.5 version, The most important changes in this version are: Completed scenery between Hardenberg and Emmen new scenery build between Hardenberg and Almelo/Ommen New Tracks and speed Limiet (80 - 120 Km/h) Between Almelo and Marienberg Downloaden kan hier/Download here

Simexpress has recently released a new locomotive, the CC6500. This French series of six-axle locomotives were build between 1969 and 1975 and used for fast passenger trains and heavy freight trains. They were build for use on the 1.5kV railway lines. The locomotive comes in 3 series/variants with each 2 or 3 liveries. The locomotive comes with advanced driving features: • Realistic driving • Engine compartiment modeled and functionnal • Pneumatic assembly fully modeled • Switchable brakes regimes • functionnal gearshift • Functional failure system • Functional “VACMA” system • Realistic KVB • Pre-announcement for traffic at 200 km/h functional • Disengageable safety systems for more flexibility • Stereo sounds recorded on the actual machine • high resolution 3D and textures • Variable speed for wipers • Realistic headlight/rearlights management • Markings and inscriptions in conformity • Management of pantographs for trains AI trains More information can be found here: https://www.simexpress.fr/produit/electric-locomotives-bb15000-copie/?lang=en