Jump to content
Het is nu mogelijk om te stemmen op de Screenshot van de Maand maart! It is now possible to vote for the Screenshot of the Month March!! ×

1 Screenshot

-What's new in South-West Netherlands 2.01

 

The biggest news of course is the expansion to Rotterdam Central Station.

For a total length from Vlissingen to Rotterdam Central Station of no less than 145km!

There will be no less than 7 new stations within the new piece, so you will be in 2.0 from Dordrecht can continue driving.

You will pass De Kijfhoek, the largest shunting yard in the Netherlands. The Barendrecht Tunnel above ground.

But of course also the Feyenoord Stadium to finally arrive in Rotterdam Central Station.

 

Besides the expansion of the route, there have been many adjustments over the entire route to mention a few small things

- Scenery further on , The route has more depth than ever before. 

There are more buildings to see in the distance, but of course trees, roads, etc. to make the route even more realistic.

This also especially in the larger cities think of flats that can be seen in the background from the railroad. 

Although it is technically impossible to fill up everything and make the route run smoothly, I try to make it a bit more realistic.

to make it seem that it's not just 1 street from the station. 

- Signals are also a lot replaced, fixed or improved with new settings for advanced signal aspects.

- XGHL signals are also new in 2.0. With the arrival of the Kijfhoek there will be a lot more freight traffic,

 And in order for all these heavy trains to run safely over viaducts and through tunnels, these signals were created.

- ETCS beacons on places where this protection is used for Christrain and the K-Trains Traxx.

- Coha 2.0 track for an even more realistic look of the route by adding 2,5D elements for the sleepers and more.

- Hand-junctions are now also new, before this everything was automatic. But to take it a step higher again.

 

Several pieces have been rebuilt as well,

- Goes got a new station, the platform was moved and rearranged. ( this because of the future viaduct ! )

- The canal through Walcheren has been completely replaced, now has water with reflection. also the towpath that runs along it has been modified.

- Middelburg has had great adaptations in the area, mainly replacing houses. 

- Roosendal has tackled the old site, but also a large part of the environment. 

- Many towns and villages along the entire route have had adjustments when it comes to houses, as many houses as possible from the London area.

  route are mainly replaced by Dutch houses that were not there before.

These are just a few small examples of what has been renewed, only a true connoisseur of the route will see everything ! 

And of course also the necessary improvements, to make everything even more realistic, a lot of houses have been replaced.

the new Coha 2.0 tracks that do a lot. and all this without making the route heavier but with more FPS in heavy spots.

in some places it might only be 1 or 2 fps. but every fps is another one ! 

 

All in all enough to look forward to ! 


What's New in Version 2.01   See changelog

Released

No changelog available for this version.

  • Like 6
  • Thanks 6

User Feedback

Recommended Comments



Sjef61

Posted

  On 1/28/2021 at 2:21 PM, LEVEL3D said:

is vast en zeker een mooie route alleen mis ik heel veel objecten en ik heb geen idee waar ik moet beginnen met downloaden.. het moet toch makkelijker kunnen dan honderden dingen apart downloaden?

Expand  

 

Precies wat dylanjohn10 al aangaf.

Hier kan je alles vinden hoe en wat je moet doen

https://simtogether.com/tutorials/category/2-starting-with-train-simulator/

 

Daar staat ook een uitleg betreffende TS tools die je nodig hebt om missende assets op te sporen

 

Helaas kunnen we je het niet makkelijker maken.

Hobby's kosten nu eenmaal tijd en veel assets bouwers willen niet dat er een kant en klare assets bestand gemaakt wordt

Dit omdat er regelmatig updates komen.

 

 

  • Like 1
LEVEL3D

Posted

  On 1/28/2021 at 2:48 PM, Sjef61 said:

 

Precies wat dylanjohn10 al aangaf.

Hier kan je alles vinden hoe en wat je moet doen

https://simtogether.com/tutorials/category/2-starting-with-train-simulator/

 

Daar staat ook een uitleg betreffende TS tools die je nodig hebt om missende assets op te sporen

 

Helaas kunnen we je het niet makkelijker maken.

Hobby's kosten nu eenmaal tijd en veel assets bouwers willen niet dat er een kant en klare assets bestand gemaakt wordt

Dit omdat er regelmatig updates komen.

 

 

Expand  

Wat ik dan niet snap is dat hij zegt dat ik assets van Munich augsburg mis terwijl ik die dlc wel al heb image.thumb.png.860368d803904f50289b19c28ab41af0.pngimage.thumb.png.6aec244e84c2bcf698c8c5820dbc8cd6.png

Sjef61

Posted

Dat klopt.

 

Dat is een .AP bestand.

Dat is een soort ZIP bestand waar alle bestanden in zitten.

Je kan dat AP bestand uitpakken met TS tools of met 7ZIP of met WinRaR

Of ook zo laten ?

 

afbeelding.png

  • Like 1
LEVEL3D

Posted

ah oke, maar moet ik daar nog iets mee doen om ze te laten werken in het spel? of werken ze al maar herkent de tool het niet als afzonderlijke bestanden?

Sjef61

Posted

Ze werken al.

TS tools herkent geen ingepakte .AP bestanden.

Dus payware  die je hebt gekocht en die door TS als vermist wordt opgegeven negeren.

 

 

  • Like 1
quinten501

Posted

Hoi weet iemand wat ik hier mis?

Screenshot 2021-02-04 181416.png

Screenshot 2021-02-04 182640.png

EsméevR

Posted

Zou het kunnen dat je de Coha spoordijken mist? Wellicht niet of niet goed geïnstalleerd.

quinten501

Posted (edited)

  On 2/4/2021 at 5:40 PM, EsméevR said:

Zou het kunnen dat je de Coha spoordijken mist? Wellicht niet of niet goed geïnstalleerd.

Expand  

Ik heb hem opnieuw geïnstalleerd en ik zie ze nog steeds niet

Edited by quinten501
quinten501

Posted

Hij doet het ik had een te nieuwe ukts lofts versie 1.1.0

Sjef61

Posted

Mooi!

Kan gebeuren.

Paul3312

Posted

Hallo allemaal,

 

Na lange tijd heb ik TS geïnstalleerd, nu mis ik bijna op alle stations de overkapping en de "rol(trappen)" Ik heb Ts tools geïnstalleerd zo als @Sjef61uit heeft gelegd en gezocht naar missing files,  dat brengt mij helaas ook niet verder. Wat zou nog een optie zijn of heb daadwerkelijk iets over het hoofd gezien? Wat ik nog wel kwijt wil is, dat het een mooie route is. 

ts2021.jpg

ViqFLIRT3

Posted

2 mogelijke oorzaken

1: De pakketten van Frison zijn niet up to date, download en installeer deze pakketten alle 3 opnieuw en leeg daarna je cache

2: Scenery density staat niet op maximaal(te vinden onder settings->graphics->advanced)

Paul3312

Posted

Druk bezig geweest met downloaden, maar waarom deze melding?

frison.jpg

ViqFLIRT3

Posted (edited)

  On 2/5/2021 at 8:47 PM, Paul3312 said:

Druk bezig geweest met downloaden, maar waarom deze melding?

Expand  

Heb je ze bij Christrains of bij Dutchsims gedownload?

Bij welk pakket heb je dit probleem?

Misschien helpt dit je?

@Sjef61vgm gaat het niet bij het installeren, maar bij het downloaden mis

Edited by ViqFLIRT3
Paul3312

Posted

Downloaden bij Christrains en het gaat mis bij het downloaden.

ViqFLIRT3

Posted (edited)

Ik lees via de link in mijn vorige  bericht dit:

"Deze fouten betekenen dat Chrome het bestand niet kan opslaan op je computer.

Je kunt het volgende doen om de fout op te lossen:

Annuleer de download en probeer het opnieuw.

Klik niet op het bestand om te downloaden, maar klik met de rechtermuisknop op de link en selecteer Link opslaan als.

Zorg ervoor dat je de bestanden downloadt naar een locatie op de computer die toegankelijk voor je is, zoals het bureaublad of de map Documenten. Je kunt downloadlocaties wijzigen."

Edited by ViqFLIRT3
Sjef61

Posted

Je kan ook de browser Edge  van window gebruiken.

Paul3312

Posted

Het is gelukt, maar via een andere weg, nu de link geklikt met losse objecten en via Google drive gedownload. Iedereen bedankt voor jullie hulp. 

  • Like 2
AlexM12093

Posted

Hello, 

 

I just finished installing the route along with all its requirements and I seem to have these small objects hovering above the tracks along with no overhead lines. The photos were taken at Vlissingen Station

2021.02.17-19.48_01.png

2021.02.17-19.48.png

EsméevR

Posted

  On 2/17/2021 at 7:53 PM, AlexM12093 said:

Hello, 

 

I just finished installing the route along with all its requirements and I seem to have these small objects hovering above the tracks along with no overhead lines. The photos were taken at Vlissingen Station

 

 

Expand  

 

Hi there,

 

Those little 'milk cans' mean you're missing some object still. I do not have this route and don't know it's requirements, but can you double check if you installed all the overhead portals and wires listed here on the website?

 

Edit: As far as I can tell this is the only package you need:

https://simtogether.com/files/file/101-nederlandse-bovenleiding/

AlexM12093

Posted (edited)

  On 2/17/2021 at 8:02 PM, EsméevR said:

 

Hi there,

 

Those little 'milk cans' mean you're missing some object still. I do not have this route and don't know it's requirements, but can you double check if you installed all the overhead portals and wires listed here on the website?

Expand  

 

Hi,

 

I am sure that I have downloaded and installed everything but I will double check as you have suggested 

 

Edit: I just checked the Nederlandse Bovenleiding file and it has 2 .rwp files in it, I think I may have only installed one so I will do them both again and see if the fixes anything 

 

Edit 2: All fixed! 

 

2021.02.17-20.15.png

Edited by AlexM12093
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Home
Activities
Sign In

Sign In



×
    Search In
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.Privacy Policy