Leaderboard

Seven versions of NS Plan U in the color liveries red and yellow.

In 1951 the Dutch Railways ordered 30 diesel single units and 46 diesel multiple units, wich where build by Allan & Co, and were delivered in 1952. Also ordered was a a special variant for inspection purposes for the managing board of the Nederlandse spoorwegen (Dutch Railways). In this package you can find 18 versions of Plan X in blue, red and yellow colors. – 3 versions of the single unit DE1 20 Kameel – 4 versions of the single unit DE1 – 8 versions of the multiple unit DE2 in its original form with a 2 or 3-part trainnumber – 3 versions of the multiple unit DE2 in its refurbished form

The HSL Amsterdam-Antwerpen route contains the full HSL-South in the Netherlands and HSL 4 in Belgium, from Amsterdam via Schiphol, Hoofddorp, Rotterdam, Breda and Noorderkempen to Antwerp. Version 4 now also contains the line from Breda to Tilburg! In total these add up to about 200km of playable lines! These lines allow for a big variaty of drivable trains: Commuter trains on the classic lines, Intercity Direct, Eurocity (Direct) and Eurostar trains are all possible. Important! First delete the old route before installing the new one. This can be done from the TS menu > Build and find the old route, and click delete. Or go via windows explorer to railworks\Content\Routes and delete the folder "fd3a837c-4903-4237-a76b-83229dca6b48". We wish everyone a lot of fun on the HSL Amsterdam-Antwerpen!

This Mod changes the entire sound within Train Simulator. Almsot everything has been redone and modified. In addition the driving physics have been overhauled including the removal of the camera shaking when braking or accelerating A preview video is here Sounds have been taken almost entirely from the YouTube Channel 4K Train Driver’s POV Dutch Railways. Additional sounds were recorded at Groningen railway station Installation 1. Install the ICMm DLC by ChrisTrains 2. Go to your Train Simualtor main folder (usually C:\Program Files (x86)\Steam\steamapps\ common\RailWorks). There is a executable program called Utilities.exe. Under the section Package Manager you can install the *.rwp file included in the download. If there is a problem with installing, you can try installing it manually: 1. Open the *.rwp with WinRAR or 7Zip. You’ll find a folder called ‘Assets’. 2. Copy this folder into you Train Simualtor main directory and overwrite everything when asked Cover photo: https://www.flickr.com/photos/robdammers/8763211599/ - CC BY SA 3.0

-What's new in South-West Netherlands 2.01 The biggest news of course is the expansion to Rotterdam Central Station. For a total length from Vlissingen to Rotterdam Central Station of no less than 145km! There will be no less than 7 new stations within the new piece, so you will be in 2.0 from Dordrecht can continue driving. You will pass De Kijfhoek, the largest shunting yard in the Netherlands. The Barendrecht Tunnel above ground. But of course also the Feyenoord Stadium to finally arrive in Rotterdam Central Station. Besides the expansion of the route, there have been many adjustments over the entire route to mention a few small things - Scenery further on , The route has more depth than ever before. There are more buildings to see in the distance, but of course trees, roads, etc. to make the route even more realistic. This also especially in the larger cities think of flats that can be seen in the background from the railroad. Although it is technically impossible to fill up everything and make the route run smoothly, I try to make it a bit more realistic. to make it seem that it's not just 1 street from the station. - Signals are also a lot replaced, fixed or improved with new settings for advanced signal aspects. - XGHL signals are also new in 2.0. With the arrival of the Kijfhoek there will be a lot more freight traffic, And in order for all these heavy trains to run safely over viaducts and through tunnels, these signals were created. - ETCS beacons on places where this protection is used for Christrain and the K-Trains Traxx. - Coha 2.0 track for an even more realistic look of the route by adding 2,5D elements for the sleepers and more. - Hand-junctions are now also new, before this everything was automatic. But to take it a step higher again. Several pieces have been rebuilt as well, - Goes got a new station, the platform was moved and rearranged. ( this because of the future viaduct ! ) - The canal through Walcheren has been completely replaced, now has water with reflection. also the towpath that runs along it has been modified. - Middelburg has had great adaptations in the area, mainly replacing houses. - Roosendal has tackled the old site, but also a large part of the environment. - Many towns and villages along the entire route have had adjustments when it comes to houses, as many houses as possible from the London area. route are mainly replaced by Dutch houses that were not there before. These are just a few small examples of what has been renewed, only a true connoisseur of the route will see everything ! And of course also the necessary improvements, to make everything even more realistic, a lot of houses have been replaced. the new Coha 2.0 tracks that do a lot. and all this without making the route heavier but with more FPS in heavy spots. in some places it might only be 1 or 2 fps. but every fps is another one ! All in all enough to look forward to !

This version of the route comes with a number of routes in the Gelderse Achterhoek and the Overijsselse Twente be found. The total length of the routes in this version of the route guarantees approximately 275 kilometers of driving pleasure. Among these there are quiet diesel lines, but also the busier lines of the main rail network. In addition, freight can be loaded and unloaded at various yards. In short, a very diverse and varied route with numerous options to play with. Manual: Achterhoek- en Twentelijnen V5.1.pdf

We have reached 10.000 members on SimTogether! To celebrate this moment, we release this special VIRM repaint for Train Simulator. Thank you for your support, enjoy this special VIRM and we're looking forward to welcome another 10.000 members! ? Special thanks to @It_is_just_brian for developing this repaint! ? Note: the readme includes the installation instructions for the repaint. The .rwp file includes a consist and makes the repaint suitable for Quick Drive.

Package with Belgium overhead wires and extra parts (3Kv) Version 1 Some parts are specifically tailored for the signal portals from the Belgian Signal package v2 from CoHa.nl Features: See attachment with information photos Manual not included If something is missing, please report this via a PM to me Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool" Correction on hight for all Console's bij use of TAB

2 repaints of the Vectron '' Standard '' (so no Advanced) Install RWP and add the GEOPCDX file from the original location. ..\Rsslo\Locomotiv\Vectron\Engine\DB_3100_B.GeoPcDx to ..\Rsslo\Locomotiv\Vectron\Engine_SNCB 1888 ..\Rsslo\Locomotiv\Vectron\Engine_SNCB 1922 There are Preloads included. Just drive! Laat een berichtje achter als je hier toch bent !

3 types of street lamps 1x Bulp 1x LED 1x Natrium Various electricity poles and house connection with and without lighting

This a repaint pack made for the Christrains G1206. This package contains 22 unique repaints: CT MaK1206 AT 1375 CT MaK1206 AT 1506 CT MaK1206 AT 1796 CT MaK1206 ERS 1202 CT MaK1206 ERS 1203 CT MaK1206 IRP 2201 CT MaK1206 IRP 2211 CT MaK1206 LC 1505 CT MaK1206 LC 1506 CT MaK1206 LC 1601 CT MaK1206 LC 1796 CT MaK1206 LNS 1571 CT MaK1206 LTE 5633 CT MaK1206 MRCE 1553 CT MaK1206 MRCE 7110 CT MaK1206 RFO 1572 CT MaK1206 RTB V155 CT MaK1206 RTB V158 CT MaK1206 RTB V159 CT MaK1206 RTB V160 CT MaK1206 RTS 1018 CT MaK1206 VCN 1509

This is a composite package of objects made by Sjef! (The Netherlands) Features: Easy to install Manual in Dutch Installation: Install the RWP start the game en go to "settings\Tools\Clear Cache" Restart the game and have fun

This is the latest version of the South of the Netherlands. Utrecht - Den Bosch Den Bosch - Eindhoven Tilburg - Eindhoven

The most ambitious of them all, with everything as accurate as possible. https://youtu.be/N6HNR4yNAlo

Enjoy the VIRMm and VIRM with better sounds! including new door sounds, engine sounds and cab sounds! All you have to do is install the RWP file with the Utilities tool and then you can enjoy the soundmod in TS! Check this video out:

13x traffic island (4x 2,2 meter and 4x 1,2Meter and 5x 0,90 meter) / Lofts 6x sidewalk for railway crossing / Lofts

16 pieces Planters in various sizes and designs. With winter texture

Description In V3.1 The Maastricht – Roermond section has been added to the route. Route markers added to the route. Various technical adjustments to the rails, switches, signals and ATB. More Portals for the scenario builders added to the route. The platforms in Landgraaf are extended to 130 meters. Vegetation on the Maastricht - Kerkrade section adjusted. New station buildings for Klimmen-Ransdaal and Voerendaal. CTAs replaced by new type from Christrains In V3.1, the Maastricht Randwyck – Kerkrade Centrum section was added to the route. This section is mainly served by Arriva with the following services: RE 18: Express train Maastricht – Aachen VV. (from the December 2023 timetable this will be the three-country train Liège – Aachen via Maastricht and Heerlen). RS 18: Stopping train from Maastricht Randwyck to Kerkrade Centrum VV. From Maastricht Randwyck to Maastricht you drive a small section on the Maastricht - Liège line. From Maastricht to Schin op Geul follow the line Maastricht – Aachen. In Schin op Geul you then switch to the Schin op Geul to Heerlen line. From Heerlen to Landgraaf you come on the Sittard – Herzogenrath line. The last stretch from Landgraaf to Kerkrade Center is on the Miljoenenlijn. The tram line Maastricht - Vaals is a lost steam tram line in the Limburg hills. The line connected Maastricht and Vaals between 1922/1925 and 1938 via Gulpen and Wijlre. The line had a length of 28 kilometers and was carried out in standard gauge. The simulation assumes that the line has been operated for a longer period of time. In the 1990s, the “Stichting Museumlijn Maastricht – Vaals” (SMMV) was established. After approval from the provincial government, the dilapidated line was made accessible again and the foundation could start with tourist trips on this line. (similar to the ZLSM on the million-dollar line). The simulation shows the situation around 2020. The simulation of the Miljoenenlijn is as it is operated by the ZLSM in the present time. This applies to the route, but also to all speeds indicated on signs. The route is 2-track between Wijlre and Schin op Geul. Seen from Wijlre, the ZLSM only runs on the left track. You can drive on the right, but then you have to go through quite a bit of wild grass… From Schin op Geul to Valkenburg you also drive on the left track.

This is a composite package of objects made by PGR! Features: Easy to install Manual in Dutch Installation: Install RWP start the game en go to "settings\Tools\Clear Cache" Restart the game and have fun

Today you drive the IC Roosendaal-Vlissingen with severe weather. First and foremost my thanks go to Sjef, for the beautifully crafted markers and fork lightning. Whereby it was possible for me to add beautiful effects. Thank you very much for this. This scenario includes the following: - Alternating weather - Fork lightning - Station broadcaster - Train broadcaster - Drive-by * - Spoken train traffic control - Emergency vehicles - Stop signals - Sound effects * ATTENTION: WITH A DRIVE-BY YOU MUST DRIVE ON THE “HUD” FOR A TIME. Tip: It is best to drive with the ATB, so that the correct speeds are maintained. And the timing of the scenario is running smoothly. This scenario works only in 64 bit.

In this release are 15 versions of the NS 2400 - 2500 series in several liveries with working flashlights. Also included are 3 wagon versions for transportation in a train or as a static objects on the tracks. There are 7 versions of the 2530 in several liveries also with working flashlights.

A fully revised version op the NS Plan E.

Northwest Netherlands v5.0 is now released! The route contains these railway lines: - Den Helder - Alkmaar - Amsterdam Central Station - Uitgeest - Haarlem - Amsterdam Central Station - Amsterdam Central Station - Schiphol Airport - Hoofddorp - [NEW] Enkhuizen - Zaandam - [NEW] Haarlem - Zandvoort Features: Manual in Dutch New download links in the "Requirements" tab Installation: Go to the folder "Railworks" Insert here the folder "Assets" Then start "Noordwest Nederland route_v5.exe" Make sure you have installed the latest packs such as SimTogether, ChrisTrains and Frison Scenery Packs. "Clear Cache"

Heuvelland is a fictional Dutch route for Train Simulator. This route is situated in a hilly landscape comparable to the South of the Netherlands. The route is about 50 km long. There are two routes between the cities of Eelten and Aalbricht: a double track route via Burghem and a single track route via Glasbeek.

This package was originally intended as an exclusive set for Project Randstad, but due to increasing demand for this package, it was nevertheless decided to release it as a separate package for everyone. The set is meant to give routes an even more realistic picture, in my opinion overhead contact line is an important part of a route, because you constantly drive underneath it. A lot of time has been devoted to the development and testing of the set, but due to the complexity of the set, it is quite possible that something has been overlooked, errors can be reported in the topic at the train point. Note: Because this package relies on realism, it is an extensive and complicated package, placing realistic overhead wires takes a lot of time. Read this manual carefully! Features: Various types, including HSL SOUTH Manual in Dutch Installation: Install the included .rwp file with Utilities.exe "Steam\SteamApps\common\ RailWorks" start the game and "Clear Cache" Restart the game and have fun

With this new simulation program, you can take the role of the signaller of a railway station. The goal of the simulation is to ensure smooth running of the trains throughout your area of responsibility. You can do this by setting points and signals. Note: this is not an add-on for a different simulator, but a separate, freeware program. Note: this is a beta version (see below). Requirements: - Microsoft .Net Framework needs to be installed. - A second monitor is useful to get an overview of bigger stations - About 1.5 GB of RAM will be consumed by the sim. This is quite a lot, but hopefully it will be reduced in a later version ? Installation: Not necessary. Just unpack the Zip and play. In the Zip you can also find the manual. Content: In this simulation you have the choice between four stations: - The relatively modern GRS NX interlocking system that is installed on Roermond station. A demonstration is available here: https://vimeo.com/433942880 - Another GRS NX interlocking system of Heerlen station. - The pre-WW2 Siemens&Halske interlocking system that was installed on Kerkrade West station until 1988. A demonstration is available here: https://vimeo.com/500904526 - Another S&H interlocking system of Wijlre station (both signal boxes). All stations and their interlocking systems were recreated in the situation of the late 80s with great attention to detail. The same applies for the provided timetables. A detailed instruction manual is provided for the sim (however presently only in the Dutch language), as well as a separate manual for each station that shows the local specialties. Beta version: This is a beta version. The main goal is to test that everything works as it should. So if you encounter anything strange, I would really appreciate a comment below so it can be fixed. To make the beta testing easier, this version does not simulate any technical failures or delays yet. So if something goes wrong, it's due to the sim and not due to a failure. ENJOY!

Dutch roads loose road surface Complete roads with sidewalk and water wells Complete roads with sidewalk and water wells and traffic Sidewalks with curb bike path single Bike path double water wells posts / Parking posts Slabs with tiles / 2 sizes With Winter Textures See pictures and overview.

This package contains : Various Abri's 2021 Loose lamp for under the waiting Abri's 2x Arriva ticket Board Attention Train Various benches New set of bicycle sheds Platform stairs Sign HUB Bins Various Arriva objects And a new set of platform lights Objects with Nighttextures Please leave a message if you download or use it ? It is a small effort

This is a composite package of objects made by Dutch TrainSimulations (The Netherlands) incl. Repaints from Sikkenbaas Features: Easy to install Manual in Dutch Installation: Copy the content of “SimTogether Dutch TrainSimulations objectpakket v2.1.zip” to: C:\Program Files (x86)\Steam\steamapps\common\RailWorks start the game en go to "settings\Tools\Clear Cache" Restart the game and have fun

This newest version of the route The east of the Netherlands, offers you the possibility to drive 90 realistically modeled kilometers between Winterswijk and Arnhem CS. services and more. Before driving this route, please consult the included manual. Features: 90 kilometers long 14 Stations Manual in English, Dutch and Deutsch New download links in the "Requirements" tab Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

DD-AR sounds completely overhauled and modified.

Four types of highway lights that are used in the Netherlands on their highways. Four types of streetlights

Here a set with farmhouses and barns. The farms have lighting inside All objects have winter texture

You wil drive this ICMm from Zwolle as far as 's Hertogenbosch as IC 3667, where you will be relieved by a collegue.

Route Marseille-Martiques version 1.2. This package contains four scenarios, French rolling-stock and required assets. Features: Easy to install No manual included Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

Enjoy the GTW's with better sound! reworked motor sounds, cab sounds and passenger sounds. Video:

In this release are 8 variants of the NS 200 – 300 Sik (goat) in several liveries with a working (though not functional) Hiab crane and flashlights. Also included are 8 wagon versions for transportation in a train or as a static object on the tracks.

Bus stop sign Vlaanderen

QBuzz bus stop signs 6 pieces New

Directional signs for Route Achterhoek- en Twentelijnen See pictures.

A number of Belgian houses with shops. Most of it has snow textures, there will be an update with night textures and possible expansion of homes and shops. This made possible by LeFacteur. Een reactie is altijd welkom natuurlijk !

5 variants of a container base straddle carrier for use in your container port scenes. Features: Manual in English Installation: Install the included .rwp file with "Utilities.exe" "Clear Cache" or use Train Simulator Blueprint removal tool"

The ICR was the main Intercity coaches of the NS back in the day. For that reason we must have them in TS! Dirt and clean! I also made some special version we didn’t have yet. If you have the CT ICM(m) 4.0 update, you will need to instal the patch. replace all the files!

In this update, the Belgian train control system TBL1+/MEMOR has been added to ChrisTrains' BR 186 "Traxx". MEMOR is the predecessor of TBL1+ and works with so-called "crocodiles" that lie between the rails at a signal, for example. TBL1+ was introduced in 2008, and in the meantime is already slowly being replaced by the European ETCS. Today, TBL1+ is present on virtually the entire Belgian rail network. Installation: Install the necessary updates for the Traxx and the Coha BE signaling package (see manual) Download and install the TBL1+ update with the included .exe file Delete the cached files from TS with "Clear cache" Important notices: Testing has shown that the package can cause problems with repaints from the DCR BR 186 Traxx repaint pack. The standard NMBS/NS Traxx from ChrisTrains work fine. This is being worked on by the DCR team Please read the manual thoroughly! TBL1+ seems to be a rather complex system, but in the manual all possible scenarios and required actions are explained For route builders: a manual on how to place the balises is included in the Manuals.zip This update is not (yet) compatible with the "SKTRAINS Belgian signalling pack" Preview: https://youtu.be/XUm6xM7bZCM If you have any questions or comments, feel free to send a PM or leave a message in the comments. Enjoy the update! Thanks to: ChrisTrains, Coha.nl and many others

Transformer houses and junction boxes